Sub-Zero ICBBI-36UG manual FRE Ezer STO Rage FR Eezer Baske T REM Oval, ICE BU CK ET Remov AL

SU B-ZERO BUILT -I N USE & CARE

FRE EZER STO RAGE

FR EEZER BASKE T REM OVAL

All freezer and side-by-side models: First, unload the freezer basket. To remove the basket, pull it out until it stops. Behind the bottom two corners of the front face of the basket are metal clips. Pull these clips toward the front of the basket and lift and rotate the basket up.

IMPORTANT NOTE: To remove the baskets from Models ICBBI-36S, ICBBI-42S or ICBBI-42SD, the basket must be raised and pulled through the opening in the door liner after disengaging the basket from the slides.

IMPORTANT NOTE: If Models ICBBI-36F or ICBBI-36S are limited to a 90° opening, it may be necessary to remove the basket and/or shelf above in order to remove the basket.

To reinstall, push the drawer slides back into the freezer. Align the basket with the slides, and push the basket straight back onto the slides until it stops. Press downward on the front of the basket to engage the basket clips with the slides.

Over-and-under models: First, unload the freezer baskets. To remove the upper freezer basket, lift up on the front and pull forward to release the basket. To remove the lower freezer basket, lift the basket directly upward and out. Refer to the illustration below.

To reinstall the lower freezer basket, insert the basket into the four corner retainers. To reinstall the upper freezer basket, position the basket onto the slide rails. Slide the basket towards the back. You should hear an audible click when the engagement is made.

IMPORTANT NOTE: Unload the freezer baskets before removing.

ICE BU CK ET REMOV AL

Over-and-under models and Model ICBBI-36F:

To remove the ice bucket, pull the freezer drawer or basket out until it stops and lift the ice bucket out.

Models ICBBI-36S, ICBBI-42S and ICBBI-48S:

To remove the ice bucket, pull the bucket for- ward until it stops. Next, lift the bucket to clear the carrier assembly along the back edge of the bucket. Once the bucket has cleared the assembly, continue to pull forward and out. If the door is limited to a 90° opening, repeat the pro- cedure, but when lifting the ice bucket out, pivot the right side of the bucket toward you and out. This will allow the ice bucket to clear the door. Refer to the illustration below.

Models ICBBI-42SD and ICBBI-48SD: To

remove the ice bucket, pull the bucket out part of the way, then rotate the right side of the bucket as you continue to pull the bucket out. Refer to the illustration below.

Freezer basket removal— all freezer	Freezer basket removal—	Ice bucket removal— Models	Ice bucket removal— Models
and side-by-side models	over-and-under models	ICBBI-36S, ICBBI-42S and ICBBI-48S	ICBBI-42SD and ICBBI-48SD

9