Swann H.264 Layout of the DVR4-2600, 1 2 3 4 5 6 7, Power Indicator: This LED is, be impaired

Layout of the DVR4-2600

1 2 3 4 5 6 7 8

9	10	11		12	13	14	15	16	17	18	19
1) Power Indicator: This LED is			5) PTZ: Opens the Pan, Tilt, Zoom pop-
illuminated when the DVR is connected			up menu. This is used to control PTZ
to power and switched on.			capable camera systems, and will not
2) Infrared Sensor: Monitors signals			affect standard cameras.
			6) CH+: Moves “up” one channel.
coming from the infrared remote control.
If this sensor is blocked or obstructed,			7) CH-:As 6, but descends one channel.
then the functionality of the remote will
be impaired.		8)		Display (All)				Mode: Enters			split-

3)Hard Drive Indicator: Lights up screen multi-view. The whole screen

when the hard drive is active. It will flash	is split into four or nine sections, each
rapidly when recording or searching (in	displaying the images from one camera.
time with the read/write cycles).	Press multiple times to cycle through all
4) Menu/ESC: One of the primary	available viewing modes.
	9) Rewind: During playback, this will
controls for navigating through the
menus. When in live-viewing mode, it	reverse the footage. Press multiple times
will enter the main menu. When pressed	to increase the speed of the reversing.
in the main menu, it will return the DVR	When navigating through menus, this
to live-viewing mode. Finally, when in a	button will move the cursor to the left.
submenu, this button will return you to
the main menu.

8