Connections (2)

AUSB audio input port

Use to input digital audio from a computer. Connect with a USB port on the computer.

Use a commercially available USB cable to make the connection.

ppInstall the dedicated driver before connecting the computer to this port by USB (page 20).

BETHERNET port

If you want to use a wired Internet connection, con- nect the ETHERNET port of this unit to an Ethernet network using a commercially available Ethernet cable.

ppIf you connect or disconnect the Ethernet cable while the unit is turned on, put the unit in standby, disconnect the power cord from the wall outlet, connect it and turn the unit on again.

CWireless LAN antenna

If you can use a wireless LAN in your installation site, the unit connects to the LAN using the wireless LAN antenna. As shown in the illustration on page 11, turn the antenna so that it points up.

DPower inlet [~IN]

Connect the supplied power cord here.

ppUnplug the cord from the outlet when not using the unit for a long time.

VCAUTION

ppBe sure to connect the power cord to an AC outlet that supplies the correct voltage.

ppHold the power plug when plugging it into an outlet or unplugging it. Never pull or yank on the power cord.

EDigital audio input connectors [COAXIAL,OPTICAL]

Use to input digital audio. Connect to the digital audio output connectors of a device capable of outputting digital audio.

COAXIAL: Coaxial digital cable (RCA)

OPTICAL: Optical digital cable (TOS)

12