FAUX 1 IN/OUT jacks

These input/output analog audio signals.

Connect this unit’s input and output jacks to the output and input jacks of other devices using commercially available audio cables.

ppConnect an audio cable’s white pin plug to the white (L) jack and connect its red pin plug to the red (R) jack.

White (L)

White (L)

Red (R)

Red (R)

ppIf you want to use a recorder (eg. a cassette deck or a CD recorder) with this unit, connect the output jacks of the recorder to the AUX 1 IN jacks of this unit and connect its input jacks to the AUX 1 OUT jacks.

ppBe sure to insert each plug securely. To prevent humming and interference, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.

GPHONO jacks

Connect the turntable’s RCA pin cable to the PHONO jacks.

ppConnect an audio cable’s white pin plug to the

 

white (L) jack and connect its red pin plug to the

 

red (R) jack.

 

ppBe sure to insert each plug securely. To prevent hum-

 

ming and interference, avoid bundling the signal

 

interconnection cables together with the AC power

ENGLISH

cord or speaker cables.

 

ppThis unit supports the use of MM cartridges (input

 

sensitivity: 2.5 mV/47 kΩ). It does not support the

 

 

use of MC cartridges.

 

HGrounding connector [SIGNAL GND]

Connect the grounding wire of the turntable here.

ppThis is not an electrical safety ground.

ppIf the grounding wire of the turntable is not connected here, hum noise may be heard.

13