Cannot find a folder/file. (Shared Folders)

eConfigure the folder/file sharing setting (pages 44-46).

eAdd the file to the shared folder.

eEnter a correct password of the user account. eCheck the file format (page 8).

eIf you have antivirus security software enabled on your computer, the unit may fail to connect.

Since this unit uses a microcontroller, external noise and other interference can cause the unit to malfunc- tion. If this should occur, unplug the unit’s power from the outlet and wait a little while before plugging the power in again and retrying the operation.

If the unit still does not function properly after doing this, follow the procedures in the next section to restore the unit to its factory default settings.

Restoring factory settings

If the unit does not operate properly, follow the procedures below to restore the unit to its factory default settings. This might return it to ordinary operation.

1 When the unit is in standby, hold down the SOURCE button and play/pause button (y/J) together for at least 4 seconds.

ENGLISH

Hold down for

at least 4 seconds

2 Disconnect the power cord from the outlet, connect it again, and then press the STANDBY/ ON button to turn the unit on.

The unit is restored to its factory default settings.

ppIf the power supply is interrupted for 14 days or longer, all the settings kept in memory (such as timer settings) will be erased.

ppIt takes more than 3 days after plugging the power cord into the outlet to charge enough electricity for the memory backup function.

59