About the ErP

This product is compliant with the European ErP Standby Power Regulation. In order to comply with this regulation, the automatic power saving function of this unit is set to 30 minutes when shipped new, so the unit will automatically enter standby if 30 minutes pass under the conditions shown in the following table.

However, when “On” is selected for the network standby setting (page 37), this function is not active. (The default network standby setting is “Off”.)

ppWhen you turn on the unit, the selected source is the one selected before the unit was put into standby.

ppDuring playback in iPod mode, if you put the unit into standby by pressing the STANDBY/ON button, the next time the power is turned on again, the unit will be in iPod mode and playback will start automatically when an iPod/iPhone/iPad is connected. Playback will not start automatically in other modes.

Status

AirPlay,

USB flash

Media

External

 

iPod/

drive

player

input

 

iPhone/

 

Internet

 

 

iPad

 

 

 

No

connection

 

 

 

 

 

 

 

 

 

Stopped/

*

 

paused

 

 

 

 

 

 

 

 

 

No input

-

-

-

signal

 

 

 

 

 

 

 

 

 

External input: USB Audio In, COAXIAL, OPTICAL, PHONO, AUX 1/2

Automatic power saving function active

-Automatic power saving function not active * Compatible only with AirPlay

/ Not applicable

Listening files on a USB flash drive (1)

You can play audio files stored on a USB flash drive by connecting it to this unit.

For details on playable files, see page 8.

1 Press the SOURCE button repeatedly to select “USB/iPod”.

ENGLISH

ppYou can also use the USB/iPod button to select this directly.

pp“Not Connected” will be displayed if no USB flash drive is connected.

2 Connect a USB flash drive to the unit.3 Select the file you want to play.

For details, see page 29.

4 Press the play/pause button (y/9) orENTER button to start playback.

ppIf you press the / button when a file is displayed, playback will also start.

27