Playing back music on a computer (1)

Installing the driver

In order for this unit to play back audio files stored on a computer, you must first install a driver on the computer. Please download this driver from the following web address.

Driver software download page http://www.teac.co.jp/audio/software_teac_e.html

USB connection is only possible with computers running the following operating systems.

Windows XP (32-bit) Windows Vista (32/64-bit) Windows 7 (32/64-bit)

Mac OS X 10.6 (Snow Leopard) (OS X 10.6.4 or later)

Mac OS X 10.7 (Lion)

Mac OS X 10.8 (Mountain Lion) (As of October, 2012)

Operation with other operating systems is not guaranteed.

CAUTION

Install the driver before connecting the computer to this unit’s USB audio input port by USB.

If you connect this unit with a computer before installing the driver, it will not work properly. Moreover, if the computer is running Windows XP, its operation could become noticeably slower, requiring it to be restarted.

ppFor instructions about driver installation procedures, please see our download page.

ppDepending on the combination of hardware and soft- ware, proper operation might not be possible even with the above operating systems.

Transmission modes

You can choose from two transmission modes when connecting this unit’s USB audio input port to a computer by USB.

Transmittable sampling frequencies are 32 kHz, 44.1 kHz, 48 k Hz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz.

ppDo not change the transmission mode during playback. Doing so could cause the unit to freeze or other problems.

ppQuit the music playback software on your computer before changing the transmission mode.

1 Press the SOURCE button repeatedly to select “USB Audio In”.2 Press the NET button to select the mode.

Press once to show the current mode. Press again to change the mode.

Example: 86%$XGLR,Q>0@Transmission mode

20