Teac Network USB DAC Integrated Amplifier, NP-H750 Sleep Timer, Setting the wake-uptimer (1), Setting the time of the timer, SLEEP, SLEEP, SLEEP, SLEEP OFF

Sleep Timer

Using the sleep timer, you can put the unit in standby after a specified amount of time.

Press the SLEEP button repeatedly until the desired setting appears on the display.

The settings for the time until the unit enters standby change as follows.

Setting the wake-up timer (1)

You can set the wake-up timer to start playback at a set time.

ppAdjust the clock before setting the timer (page 23).

Setting the time of the timer1 Press the TIME SET button repeatedly until “On Time” is displayed.

SLEEP 90

SLEEP 80

・

・

・

・

SLEEP 10

SLEEP OFF

Enter standby after 90 minutes

Enter standby after 80 minutes

(More options

in 10-minute steps)

Enter standby after 10 minutes

Set the sleep timer setting to OFF

The “hour” value blinks.

2 Press the scroll buttons (k/j) to set the hour value, and press the ENTER button.

e

ppThe display will be dimmed when you set the sleep timer.

ppAfter setting the sleep timer, press the SLEEP button once to show for three seconds the amount of time until the unit enters standby.

ppWhen the sleep timer setting is set to OFF, dimming of the display also stops.

50

The “minute” value blinks.

ppIf you do not do anything for 30 or more seconds, the unit will exit timer setting mode automatically.

ppTo exit timer setting mode, press the stop (8) button.