Teac Network USB DAC Integrated Amplifier, NP-H750 Changing the timer mode, Setting the timer (daily or once), ENGLISH, 4 Repeat step and to set the Off time, 1 Set the timer on and off times (page 50)

3 Press the scroll buttons (k/j) to set the minute value, and press the ENTER button.

e or

“Off Time” appears on the display, and the “hour” value blinks.

4 Repeat step and to set the Off time.

“Source Select” appears on the display.

5 Press the scroll buttons (k/j) to select the source, and press the ENTER button.

e

This completes setting the clock time used for the timer.

Next, you must activate the timer. Follow the procedures in the next sections.

ppUSB playback is not possible. Only iPod/iPhone/iPad playback is possible.

ppAirPlay cannot be used with the wake-up timer.

Changing the timer mode

Press the remote control’s TIMER button to cycle through timer modes as follows.

Timer O￿	ENGLISH
Timer Daily
Timer Once

Setting the timer (daily or once)

At the set On Time, the unit will turn on and start playback (every day or once). At the set Off Time, the unit will enter standby.

1 Set the timer on and off times (page 50).

2 Select “Timer Daily” or “Timer Once” by pressing the TIMER button on the remote control unit.

The timer indicator “” lights on the display.

ppWhen in standby, power consumption is less than 0.5 W, so “” will not be shown.

Continued on the next page e 51