Troubleshooting (1)

If you experience a problem with this unit, please check the following items before requesting service. If it still does not operate correctly, contact the retailer where you purchased the unit or TEAC customer support (See the back cover for contact information).

GeneralNo power.

eCheck that the power cord is completely plugged into the power outlet.

No sound output

ePress the SOURCE button to select proper source. eAdjust the volume.

Remote control unit does not work.

eIf the batteries are exhausted, change the batteries.

eUse remote control unit within the range (5 m/16 ft.) and point at the front panel.

eClear obstacles between the remote control unit and the main unit.

eIf a fluorescent light is near the unit, turn the light off.

The sound is noisy.

eThe unit is too close to a TV set or similar appliances. Install the unit apart from them, or turn them off.

Audio FilesThere is no sound even if the play/pause button (y/J) is pressed.

eCheck the file format (page 8).

“Artist:[ ]”, “Title:[ ]”, and “Album:[ ]” appears on the display.

eThere is no ID3 tag information for the music file.

Edit the title, artist, and album information of the song on a PC using editing application software for MP3, WMA or other file formats.

Some unknown characters are displayed on the display panel.

eThis unit cannot display symbols and full-size or double-byte characters (such as Japanese, Chinese, etc.) correctly. File names for MP3, WMA or other file formats should consist of alphanumeric characters.

iPod/iPhone/iPad

ppThe following explanations refer to an iPod, but they also apply to use with an iPhone or iPad.

Will not play.

eRemove the iPod from the USB port, wait a few seconds, and insert it again.

eSoftware update may solve the problem. Visit the Apple website and download the latest iPod software. http://www.apple.com/downloads/

Cannot operate the iPod/iPhone/iPad.

eMake sure the HOLD switch of the iPod is not set to HOLD.

eYou cannot adjust the unit volume using an iPod/ iPhone/iPad.

USB connections with a computerThe computer does not recognize this unit.

eUSB connection is only possible with computers running the following operating systems.

Windows XP (32-bit) Windows Vista (32/64-bit) Windows 7 (32/64-bit)

Mac OS X 10.6 (Snow Leopard) (Mac OS X 10.6.4 or later)

Mac OS X 10.7 (Lion)

Mac OS X 10.8 (Mountain Lion) (As of October, 2012)

Operation with other operating systems is not guaranteed.

eYou must install the dedicated driver on the computer. If you connect this unit with a computer before installing the driver, it will not work properly (page 20).

57

ENGLISH