Listening to an iPod/iPhone/iPad (1)

For detailed information about compatibility, see page 10. ppThe following explanations refer to an iPod, but they

also apply to use with an iPhone or iPad.

1 Press the SOURCE button repeatedly to select “USB/iPod”.

ppThe remote control’s USB/iPod button can also be used.

pp“Not Connected” will appear when no iPod is connected.

2 Connect an iPod to this unit using the USB cable supplied with the iPod.

The iPod automatically turns on and starts playback from the iPod music list.

32

ppWhen the iPod is connected while a mode other than iPod/USB mode is selected in the NP-H750, the iPod will turn on and enter pause mode.

ppIf an iPod is connected to this unit, it will only be recharged when this unit is ON.

ppRecharging will stop when the iPod is fully recharged.

ppRecharging is not possible when this unit is in standby.

Pausing playback

Press the play/pause button (G/J) to pause playback. Playback stops at the current position.

To resume playback, press the play/pause button (G/J) again.

Skipping to the next or previous file/ track

During playback or when paused, press the skip buttons (.//) repeatedly until the desired file/track is found.

ppWhen the . button is pressed during playback, the file/track being played will be played from the begin- ning. If you want to play the previous files/tracks, press the .button twice or more.