Teac Network USB DAC Integrated Amplifier, NP-H750 Network configuration (2), Listening to the Internet radio (1), Listening to an Internet radio broadcast/a podcast

Network configuration (2)

5 Connect the iPod to the unit’s USB port using the USB cable that was supplied with your iPod.

6 Press and hold the MENU button on the unit for about 3 seconds.7 The buttons “Allow” and “Ignore” appear on the iPod. Select “Allow”.

The message “Wi-Fi Sharing connecting.” appears on the unit’s display.

When the setting process is completed, the message “Wi-Fi Sharing Success” will appear on the display.

8 After the message “Wi-Fi Sharing Success” dis- appears, put the unit in standby and turn it on again, and then set the unit to AirPlay mode.

38

Listening to the Internet radio (1)

Listening to an Internet radio broadcast/a podcast

Make sure to perform settings required for Internet connections before you listen to an Internet radio broadcast or podcast.

1 Press the SOURCE button repeatedly to select “Internet Radio”.

ppYou can also use the remote control’s NET button.

Each time you press the NET button, the source switches between Internet radio and media player.