Teac Network USB DAC Integrated Amplifier, NP-H750 Connecting speakers (1), Speakers, RCA cable, Subwoofer, ENGLISH, VCAUTION, SPEAKERS terminals, Before connections, Making cable connections

Connecting speakers (1)

V Precautions when making connections
		A	SPEAKERS terminals
ppComplete all other connections before connecting
			Connect speakers to this unit using commercially
	power plugs to power outlets.
ppRead the owner’s manuals of all devices that will			available speaker cables.
	be connected, and follow their instructions.		This unit’s + (positive) terminals are red ( for the right
ppDo not bundle connecting cables with power cords.			speaker) and white (for the left speaker). The black
	Doing so could cause noise.		speaker terminals are ^ (negative). Generally, the ¥
			wire of the speaker cable is marked to make it distin-
			guishable from the ^ wire of the cable. Connect the
			marked wires to the red and white ¥terminals and the
Speakers			unmarked wires to the black ^terminals.
			ppCheck the impedance of your speakers. Connect
			speakers with an impedance of 6 ohms or more.
			Before connections
			1. Remove about 1 cm (1/2”) of the sheath at the end
			of the speaker cable.
			2. Twist the cable core well.

A

Making cable connections

B1. Turn the terminal cap counterclockwise to loosen it. 2. Insert the wire into the hole in the terminal screw and turn the terminal cap clockwise to connect it

securely.

RCA cable

LINE

IN

	VCAUTION
Subwoofer	If the exposed end of a core wire in a speaker
	cable contacts another cable or terminal, a short
	could occur. Do not allow this to happen.

9

ENGLISH