Updating the firmware (3)

5 Turn the MULTI JOG knob to select “Internet”, and then press the ENTER button or the / button.

or

ppYou can check the current firmware version of your unit using “Setup Menu”. Follow the menu items as follows:

“Setup Menu” w“Information” w“Firmware Version”

6 Disconnect the power cord from the outlet, connect it again, and then press the STANDBY/ ON button to turn the unit on.

56

Updating the firmware using a USB flash drive

1 Download the latest version of the firmware file from TEAC website, save it on a USB flash drive, and insert the USB flash drive into the USB port in the unit’s front panel.

ppFor information about downloading the firmware, see page 53.

2 Follow Steps to in “Updating the firmware via the Internet” on page 55 to show the following on the unit’s display.

Setup Menu

›Software Update

3 Turn the MULTI JOG knob to select “USB”, and then press the ENTER button or the / button.

Installation of the firmware file starts automatically.

or

4 Disconnect the power cord from the outlet, connect it again, and then press the STANDBY/ ON button to turn the unit on.