Teac Network USB DAC Integrated Amplifier, NP-H750 Names and functions of parts (remote control) (2), Main unit, oINFO button, qMUTE button, nDIMMER button, Remote control, pDISPLAY button, mSkip button [.//]

Names and functions of parts (remote control) (2)

mSkip button [.//]

In USB/iPod mode, use these buttons to skip to the pre- vious or next track or file when playing back or paused. Use these buttons to adjust the balance.

When a menu is shown, use /to select in the same way as the ENTER button.

When a folder is shown, press . to move up one folder level.

nDIMMER button

Use this button to change the brightness of the dis- play (page 26).

oINFO button

While listening to the Internet radio or with the media player function, use this button to change the informa- tion on the second line of the display.

pDISPLAY button

In USB/iPod mode, use this button to change what information is displayed.

qMUTE button

Use this button to mute the sound.

rVOLUME buttons [+/−]

Use these buttons to adjust the volume level. Press + to increase and − to decrease the volume.

sScroll buttons [k/j]

In USB/iPod mode, use these buttons to select a folder or file that is on a device connected to the unit’s USB port. (When an iPod/iPhone/iPad is connected, use these to scroll through its menu.)

When making settings, use these to scroll through menus.

After pressing the TONE button, use to adjust the tone settings (low and high frequency levels) (page 26).

18

ppWhen in network mode, the buttons on the unit and the remote control function differently.

Main unit

Status	Button	Function
Stopped	Play/pause button	Change network mode
	(7/9)
	Stop button (8)	No function
Playing back	Play/pause button	Play/pause
	(7/9)
	Stop button (8)	Show information
Remote control
Status	Button	Function
Stopped	Play/pause button	Start playback
	(7/9)
	INFO button	No function
Playing back	Play/pause button	Play/pause
	(7/9)
	Stop button (8)	Stop playback
	INFO button	Show information