Teac Network USB DAC Integrated Amplifier, NP-H750 Setting the current time (1), Status, On Time, O￿ Time, Current Time, Source Select, 2 Press the TIME SET button

Setting the current time (1)

Set the current time before using the unit.

ppIf the power cord is disconnected from the outlet, the set time will be reset to the default.

1 Press the STANDBY/ON button to turn the unit on.

The indicator above the STANDBY/ON button lights blue.

2 Press the TIME SET button.

“Current Time” appears and the hour value blinks.

ppPress the TIME SET button repeatedly to cycle through the following menu items. The items other than Current Time are used to set the alarm clock (page 50).

Current Time On TimeO￿ TimeSource Select

Status

ppFor Europe, the unit uses the 24-hour “military” clock. For North America, the unit uses the 12-hour clock.

ppPress the stop button (H) to cancel the time setting.

ppWhen no action is taken for 30 seconds, the clock setting mode will be cancelled.

3 Press the scroll buttons (k/j) to set the current hour and press the ENTER button.

e

The “minute” value blinks.

ppYou can also use the MULTI JOG knob and ENTER button on the main unit in the same way.

ENGLISH

Continued on the next page e 23