Teac Network USB DAC Integrated Amplifier, NP-H750 VCAUTION, HUSB port, FPHONES jack, JMENU button, LENTER button, GAUX 2 IN jack, ISOURCE button, ESTANDBY/ON button, Skip buttons [.//]

ESTANDBY/ON button

Press this button to turn the unit on or put it in standby mode.

The color of the indicator above the STANDBY/ON button shows the status of the unit.

Indicator	Status
Orange	Standby
Blue	ON

FPHONES jack

To listen with headphones, first minimize the volume. Then, insert the headphones’ plug into the PHONES jack and gradually increase the volume.

No sound will be output from the speakers while the headphones’ plug is inserted in the PHONES jack.

VCAUTION

Do not connect or disconnect headphones or turn the unit on or put it in standby while wear- ing them.

Sudden loud noises could occur, which might cause hearing damage.GAUX 2 IN jack

Connect this jack to the headphones’ jack (or an audio output jack) of a portable audio player or other device using a commercially available 3.5 mm stereo mini plug cable.

HUSB port

Connect an iPod/iPhone/iPad or USB flash drive.

ISOURCE button

Use this button to select the source.

JMENU button

In USB/iPod mode, use this button to go back to the previous menu when an iPod/iPhone/iPad is connected. When in network mode (Internet radio/media player), the setup menu appears.

	Skip buttons [.//]	ENGLISH
K
	In USB/iPod mode, use these buttons to skip to the pre-
	vious or next track or file when playing back or paused.
	Use these buttons to adjust the balance.
	When a menu is shown, use /to select in the same
	way as the ENTER button.
	When a folder is shown, press . to move up one
	folder level.

LENTER button

In USB/iPod mode, use this button to confirm selections in menus when an iPod/iPhone/iPad is connected. When making settings, use this button to confirm selection of a menu item.

In network mode (Internet radio/media player), use to select a station or track.

15