Basic operation (2)

ppIf you raise the volume level of the connected device too high, the sound might distort. If this occurs, lower the volume of the connected device until distortion stops and then adjust the volume on this unit.

Muting the output

To mute the sound temporarily, press the MUTE button. Press the MUTE button again or change the volume setting to restore the sound.

Dimmer

Press the DIMMER button to switch between the two brightness settings: bright and dim.

ppThe dimmer setting is turned off when you press the STANDBY/ON button.

26

Adjusting the tone and balance

You can adjust the low and high frequency levels as well as the left-right balance as you like.

1 Press the TONE button repeatedly to select BASS, TREBLE, or BALANCE.

Every time you press the TONE button, the mode changes as follows.

BASS TREBLEBALANCE

2 Within 3 seconds, press the scroll buttons (k/j) to adjust the bass or treble, or press the skip buttons (.//) to adjust the balance.

e

ppThe low (BASS) and high (TREBLE) frequency settings can each be adjusted in a range between –5 and +5. The left-right balance can be set to CENTER or from +1 to +6 L/R (left/right).

ppYou can also use the main unit’s MULTI JOG knob to adjust the low and high frequency levels (bass and treble).