1800126951 GV7310 E0 GTS_110X154 24/07/12 10:05 PAGE5
PROBLEMS | CAUSES | SOLUTIONS | ||
|
|
|
| |
White streaks come | Your boiler has a | Rinse out the boiler. | ||
through the holes in | because it has not been rinsed out |
|
| |
the soleplate. | regularly. |
|
| |
|
|
|
| |
Brown streaks come | You are using chemical descaling agents | Never add this type of product in the water | ||
through the holes in | or additives in the water for ironing. | tank or in the boiler (see § “for what water | ||
the soleplate and stain |
| may be used”). Contact an Approved | ||
the linen. |
| Service Centre. | ||
The soleplate is dirty or | You are ironing at too high a | See our recommendations regarding | ||
brown and may stain | temperature. | temperature control setting. | ||
the linen. |
|
|
| |
Your linen is not rinsed sufficiently or you | Ensure linen is rinsed thoroughly to remove | |||
| ||||
| have ironed a new garment before | any soap deposits or chemicals on new | ||
| washing it. | garments which may be sucked up by the | ||
|
| iron. | ||
|
|
|
| |
| You are using starch. | Always spray starch on the reverse side of | ||
|
| the fabric to be ironed. | ||
|
|
|
| |
There is no steam or | The water tank is empty (red light is | Fill the tank and press the "OK" button until | ||
there is little steam. | flashing). | the indicator goes out. | ||
| The soleplate temperature is set to the | The generator is working but steam is very | ||
| maximum. | hot and dry As a consequence, it is less | ||
|
| visible. | ||
Steam escapes from | The rinse plug has not been tightened | Tighten the rinse plug correctly. | ||
the rinse plug. | correctly. |
|
| |
|
|
|
| |
| The rinse plug seal is damaged. | Contact an Approved Service Centre to | ||
|
| order a new rinse plug seal. | ||
|
|
|
| |
| The generator is faulty. | Stop using the generator and contact an | ||
|
| Approved Service Centre. | ||
|
|
|
| |
The red “water tank | The water tank is empty. | Press the “OK” button on the control panel | ||
empty” light is flashing. |
| until the warning light goes out. | ||
|
|
|
| |
Steam or water | The generator is faulty. | Stop using the generator and contact an | ||
escapes under the |
| Approved Service Centre. | ||
appliance. |
|
|
| |
|
|
|
| |
While ironing your | This is normal and is the pump injecting | If necessary refill your water tank (see page | ||
steam generator can | water into the boiler, or the steam valve | 3 for filling the water tank). | ||
make a loud electric | opening. |
|
| |
pump noise. |
|
|
| |
The “anti calc” | Your generator requires descaling . | The next time you use your iron, press and |
| |
indicator is flashing. |
| hold the "OK" button for a few seconds on | ||
|
| the control panel to turn off the orange | ||
|
| |||
|
|
|
| |
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
If you have any problems or queries please call our Customer Relations team first for expert help and advice: 0845 602 1454 - UK / (01) 677 4003 - ROI
or consult our website - www.tefal.co.uk
EN
DE FR NL ES PT IT DA NO SV FI TR EL PL CS SK HU SL RU UK HR RO ET LT LV
5
