Status and Events
AFG3000 Series Arbitrary/Function Generators Reference Manual 4-11
Messages and Codes
Error and event codes with negative values are SCPI standard codes. Error and
event codes with positive values are unique to the AFG3000 Series Arbitrary/Func-
tion Generators.
Table 4-5 lists event code definitions. When an error occurs, you can find its error
class by checking for the code range in Table 4-6 through Table 4-14. Events in
these tables are organized by event class.
Command Errors Table 4-6 shows the error messages generated by improper command syntax.
Check that the command is properly formed and that it follows the rules in the
Syntax and Commands starting on page 3-1.
Table4-5: Definition of event codes
Event class Code range Description
No error 0 No event or status
Command errors –100 to –199 Command syntax errors
Execution errors –200 to –299 Command execution errors
Device-specific errors –300 to –399 Internal device errors
Query errors –400 to –499 System event and query errors
Power-on events –500 to –599 Power-on events
User request events –600 to –699 User request events
Request control events –700 to –799 Request control events
Operation complete events –800 to –899 Operation complete events
Extended device-specific
errors
1 to 32767 Device dependent device errors
Reserved other than above not used
Table4-6: Command error messages
Error code Error message
–100 Command error
–101 Invalid character
–102 Syntax error
–103 Invalid separator
–104 Data type error
–105 GET not allowed
–108 Parameter not allowed
–109 Missing parameter
–110 Command header error
–111 Header separator error
–112 Program mnemonic too long