Reference
2-18 AFG3000 Series Arbitrary/Function Generators Reference Manual
Using the Cursors. You can use cursors to edit a waveform. To use cursors, select
the Operations submenu in the Edit menu. Figure 2-4 is a sample of Line edit
screen.
Figure 2-4: Using the Cursor (Line edit)
In the Line edit screen, there are two cursor types: X1 cursor and X2 cursor. Use
the From X1 or To X2 bezel button to select which cursor to move. To move the
X1 cursor, push the From X1 bezel button and then turn the general purpose knob.
Or, you can enter a value for the point X1 using the numeric keypad. Entering a
value and then pushing the front-panel Enter button will move the cursor to the
specified point. To move the X2 cursor, push the To X2 bezel button and then turn
the knob or enter a value.
After specified two points, push the Execute bezel button to implement the edit
operation. The Line edit is applied to the portion between the two cursors (X1 and
X2).
When you select Operations > Data, only one cursor is displayed. The edit oper-
ation is applied to the specified point.
When you select Operations > Cut, two cursors are displayed like Line edit. The
edit operation is applied to the portion between the two cursors.