Displaying Waveforms
3-64 CSA8000B & TDS8000B User Manual
Overview Related control elements and resourcesTo control the Main view (cont.)
Explore the
Mag time base
controls
10. The next procedure describes how to set up and
control the Mag time bases.
See To Display Waveforms in a Mag View on page 3--64.
End of Procedure
Use the procedure that follows to become familiar with the display adjustments
you can make when using the Mag 1 and Mag 2 time base views.
Overview To control a Mag view Related control elements and resources
Prerequisites 1. Set up as from the last procedure. See right.
See To Display Waveforms in the Main Timebase
on page 3--62.
Turn on a Mag
view
2. Push the Mag1 or Mag2 View button (turns
amber) to display a Mag view. (See right.)
A numbered button lights when its waveform is
on:
HLighted green: view is on but not selected
HLighted amber: view is on and selected
Tip. Drag the divider bar between the two views to
adjust the display height between them. See the
figureinstep3.