Product Description
1-2 CSA8000B & TDS8000B User Manual
front-panel controls with the mouse and keyboard or with the touch screen. The
installed Windows operating system (MS Windows 98 or MS Windows 2000) is
dependent on the purchase date or product upgrade status.
Key features include:
Hindustry-leading waveform acquisition and measurement rate, with Sample,
Envelope, and Average acquisition modes.
Hsupport for up to six sampling modules (two large and four small modules)
for a maximum configuration of ten inputs. (Up to eight inputs can be active
at a time. See Maximum Configuration on page 1--11).
Hsupports integrated optical signal pick-off and clock recovery enabling
accurate triggering on optical communication-signals.
Hsupport for optical modules with several integrated, selectable reference
receivers, which eliminates the need for a multitude of add-on reference
receivers.
Hfull programmability, with an extensive GPIB-command set and a message-
based interface.
Htrue differential TDR, with fast step (35 psec reflected risetime) when used
with a TDR-capable sampling module.
Hindustry-leading trigger bandwidth (12+ GHz) when using the built-in-
prescaler.
Hsupport of both telecom (SONET and SDH) and datacom (Fibre Channel,
Infiniband, and Gigabit Ethernet) optical communication standards.
Hpowerful built-in measurement capability, including histograms, mask
testing, and automatic measurements.
Hautomatic measurements operate on Pulses, RZ eye patterns, and NRZ eye
patterns.
HDC to 65 GHz optical bandwidth; DC to 65 GHz electrical bandwidth, with
up to 12.5 GHz triggering.
NOTE. Bandwidth is determined by the specific modules that are installed.
HFrameScan acquisition for isolating data-dependent failures during confor-
mance/performance testing and for examining very low-level repetitive
signals.
Hsupport for optical conformance testing of SONET/SDH signals (including
the various forward error correction rates for these telecom rates) from
155 Mbps to 43 Gb/s, 1 and 10 Gb/s FibreChannel signals, 10.52 Gb/s