Tektronix CSA8000B, TDS8000B CSA8000B & TDS8000B User Manual 3-25

Acquiring Waveforms
CSA8000B & TDS8000B User Manual 3-25
Overview Control elements and resourcesTo set acquisitions modes (cont.)
Set the Stop
mode and action
4. Under Stop After, click one of the following options:
HRun/Stop Button Only
HCondition
5. If you selected Condition, choose a condition from the
drop-down list, such as Number of Acquisitions or
Mask Total Hits, to stop on. If the condition requires a
count (count box is enabled), enter a count.
6. Select a Stop After action from the drop-down list box.
Choose from the following actions:
HNone
HPrint Screen to File
HPrint Screen to Printer
HSave all Waveforms
Enter a filename for saving to if you’ve selected Print to
File or Save all Waveforms.
7. Click to check Ring Bell if you want audio notice when
acquisition stops.
Start acquisition 8. Push the RUN/STOP front-panel button to begin
acquiring.
See To Start and Stop Acquisition on page 3--26.
End of Procedure