Tektronix CSA8000B, TDS8000B CSA8000B & TDS8000B User Manual 3-81

Measuring Waveforms
CSA8000B & TDS8000B User Manual 3-81
Overview Related control elements and resourcesTo take automatic measurements (cont.)
Take Automatic
measurements
3. Select one of the signal (waveform) types and then
select a category from the measurement bar.
.
4. Click the measurement you want in the measure-
ment tool bar.
5. Read the results in the measurements readout.
Tip. To show the levels (see page 3--74) on which
your measurement is based, turn on Annotations:
Right click on measurement in the readout, and
select Show Annotations from the menu as
shown at right.
To see statistics 6. Right click on any measurement readout to display its
context menu.
7. Select Show Statistics to display measurement
statistics in the measurement readout. See What’s
Excluded on page 3--76 for information about the ???
indicator.