Thermador CJ302 manual Sights & Sounds, Interpreting the Control Panel

Oven Features CJ Oven Care and Use Manual

Sights & Sounds

Interpreting the Control Panel

The directions in the Care and Use Manual for setting the oven and its various modes are based on the assumption that the panel displays and sounds will “lead” or help you set the controls easily. To aid in this path, the following descriptions provide a basis for interpreting what is seen and heard.

Flashing Symbols or Numbers

Signals an incomplete setting; calls for another step or START to be touched.

I Beep

Signals the receipt of an entry.

2 Beeps

Signal an error in entry.

Default Settings

The cooking modes automatically select a suitable temperature. These can be changed when a different one is needed. CookSmart settings cannot be changed. Use Custom Combination Mode if a specific combination setting is preferred (See Page 31).

START

Touch to complete an entry and before entering an additional one.

4 Chimes

Signal the end of a setting.

Probe Symbol

Displays the internal temperature of the meat rather than the oven roasting temperature. Oven tempera- ture can be seen briefly by touching the cook mode after touching START.

Lock Symbol

Displays during the Microwave, CookSmart, and Self- Clean modes and when the door is locked. Do not attempt to open door when lock symbol is displayed. Door can be opened when symbol no longer appears.

PAU

Displays when a microwave program is paused or interrupted and door unlocks.

Err

Displays if an invalid temperature or time is entered.

Power Failure

After the power returns to the oven, the clock displays the time when the power was lost or turned off.

UPPER

LOWER

Selects the active oven to be set by highlighting the oven in the mode display window. To use the upper oven, it is not necessary to touch this pad before selecting the cooking mode. If the lower oven is in operation, press the UPPER/LOWER pad to use the upper oven.

UPPER OFF and LOWER OFF

Touch to cancel a mode that has already been started or completed.

COOK TIME

Sets the number of hours and minutes the oven will be “on.” Unlike Timer 1 or 2, the oven turns “off” auto- matically when the time elapses. This pad is used with the automatic timed oven control.

F Number Codes

These codes are displayed when there is a problem with the signal sent to the electronic control board. See Solv- ing Operational Problems, Page 64.

Convection Fan

The convection fans in both ovens operate during any convection mode. When the oven is operating in the convection mode, the fan will turn off automatically when the door is opened.

An advanced, powerful, high-performance JetDirect con- vection system is located in the upper oven. This revo- lutionary impingement convection system moves the heated air at an extremely high velocity and results in foods that are cooked in a much shorter time than stan- dard convection ovens.

This process results in a higher noise level than stan- dard convection ovens. This is normal.

Component Cooling Fan

Activates during any cooking or self-cleaning mode to cool inner components and outer door surfaces. This air is exhausted through the vent located below the lower oven. It continues to run until components have cooled sufficiently.

Page 8