TOA Electronics FPS1000-32, FPS1000-24 Modules location, Blank panels, FPS-S1U Instruction Manual

FPS-S1U Instruction Manual

10.7.6 Modules location

Up to three FPS1000 modules of the same output voltage rating can be plugged into an FPS-S1U rack. Refer to Fig 10-2 for the modules location.

PS MODULE “A”

PS MODULE “B”

Air flow direction

Front sidePS MODULE “C” see note 1

Fig 10-2: FPS1000 modules location

Note 1: Forced air cooling allow minimum 50mm of unrestricted air space at the rear of the unit. Do not obsruct air flow to the unit front panel.

10.7.7 Blank panels

Each FPS-S1U rack is supplied with two blank panels in the package. Use the blank panels to close the front panel opening in places where FPS1000 power supplies are not installed. Use M3x6 screws to fix the blank panel to the chassis. Refer to the outline drawings in chapter 11 for details.

10.7.8Repackaging for shipment Refer to Sec. 3.7.8 for details.

29