TOA Electronics FPS1000-12, FPS1000-24, FPS1000-32, FPS-S1U Chapter, FPS-T1U RACK SPECIFICATIONS

CHAPTER 16		FPS-T1U RACK SPECIFICATIONS
1	Number of power supply modules		(*1)	---		Maximum 3 x FPS1000 modules.
2	Maximum output power		(*2)	W		3000
3	Input voltage / frequency range		(*3)	---	85~265Vac continuous, 47~63Hz, Single phase
4	Maximum input current (at 100/200Vac)			A	12.0/6.0 for each FPS1000 unit installed
5	AC input connector			---	FPS-T1U :IEC inlet for each power supply module . FPS-T1U/P :None
6	Output terminals			---		Bus-bars.Refer to outline drawing.
7	Remote sensing		(*4)	V		Possible.
8	Parallel operation			---	Possible. Up to 3 racks with max 8FPS 1000 units of the same voltage and current rating.
9	Series operation		(*5)	---	Possible. Up to 3x FPS1000 units of the same voltage and current rating
10	Remote On/Off control		(*6)	---	Separate control for each FPS 1000 unit , By electrical signal or dry contact
					On/Off logic is user selectable. Refer to instruction manual.
11	DC_OK signal			---	Separate control for each FPS1000 unit, Open collector signal.
					On when Vout >80% +/-5%. Max.sink current: 10mA
12	AC fail signal			---	Separate control for each FPS1000 unit ,Open collector signal.
						Refer to Instruction Manual
13	Over Temperature alarm signal			---	Separate control for each FPS1000 unit ,Open collector signal.
						Refer to Instruction Manual
14	Vout voltage trimming			---	Possible, via separate control for each FPS1000 unit .Refer to Instruction Manual.
15	Auxiliary power supply			---	11.2~12.5VDC.Maximum output current:0.25A, for each FPS1000 unit.
16	Operating temperature			---	°		°	°	°
					0~50 C: 100% load. Derate 2%/			C, 50 C to 60 C.
17	Storage temperature			---		°
						-30~85 C
18	Operating humidity			---		10~90% RH, no condensation.
19	Storage humidity			---		10~95% RH, no condensation.
20	Vibration			---		Built to meet ETS 300 019
21	Shock			---		Built to meet ETS 300 019
22	Applicable safety standards			---		UL60950-1, EN60950-1
23	Withstand voltage			---	Input-Output: 3000Vrms, 1min. Input-Ground: 2000Vrms, 1min. Output-Ground:
						1414Vdc, 1min.
24	Insulation resistance			---		°
					More than 100Mohm at 25 C and 70% RH. Output-Ground: 500Vdc
25	Weight (Typ)			Kg		3.7
26	Size (W*H*D)			---	440x44x351mm. Refer to Outline Drawing.
27	Warranty			Yr		Two Years

Notes:

*1: The Output of all the FPS1000 modules are floating in the rack.

*2: For input voltage lower than 100Vac, maximum output power derated by 10% of the power rating.

*3: For cases where conformance to to various safety standards (UL, EN etc.) is required, to be described as 100-240Vac (50/60Hz).

*4: Remote sensing can compensate up to 1V drop on each load wire.

*5: Not apllicable for units with I2C bus option.

*6: Factory default: ON/OFF_1 P.S. is On when AC is applied.

40