TOA Electronics FPS-T1U FPS-S1U Instruction Manual, Chapter, FPS-S1U RACK SPECIFICATIONS

						FPS-S1U Instruction Manual
CHAPTER 9			FPS-S1U RACK SPECIFICATIONS
1		Number of power supply modules		(*1)	---	Maximum 3 x FPS1000 modules of the same output voltage rating.
2		Maximum output power		(*2)	W	3000
3		Input voltage / frequency range		(*3)	---	85~265Vac continuous, 47~63Hz, Single phase
4		Maximum input current (at 100/200Vac)			A	12.0/6.0 for each FPS1000 unit installed
5		AC input connector			---	FPS-S1U :IEC inlet for each power supply module . FPS-S1U/P :None
6		Output terminals			---	Bus-bars.Refer to outline drawing.
7		Remote sensing		(*4)	V	Possible.
8		Parallel operation			---	Possible. Up to 3 racks with max 8 FPS 1000 units of the same voltage and current rating.
9		Series operation		(*5)	---	Possible. Up to 2 racks of the same voltage and current rating
						Separate control for each FPS 1000 unit , By electrical signal or dry contact
10		Remote On/Off control			---	ON: 0~0.6V or short. OFF: 2~15V or open.
						Separate control for each FPS1000 unit, Open collector signal.
11		DC_OK signal			---	On when Vout >80% +/-5%. Max.sink current: 10mA
						Separate control for each FPS1000 unit ,Open collector signal.
12		AC fail signal			---	Refer to Instruction Manual
						Separate control for each FPS1000 unit ,Open collector signal.
13		Over Temperature alarm signal			---	Refer to Instruction Manual
14		Vout voltage trimming			---	Possible, via separate control for each FPS1000 unit .Refer to Instruction Manual.
15		Auxiliary power supply			---	11.2~12.5VDC.Maximum output current:0.25A*Number of installed FPS1000 units.
16		Operating temperature			---	0~50°C: 100% load. Derate 2%/°C, 50°C to 60°C.
17		Storage temperature			---	-30~85°C
18		Operating humidity			---	10~90% RH, no condensation.
19		Storage humidity			---	10~90% RH, no condensation.
20		Vibration			---	Built to meet ETS 300 019
21		Shock			---	Built to meet ETS 300 019
22		Applicable safety standards			---	UL60950-1, EN60950-1
						Input-Output: 3000Vrms, 1min. Input-Ground: 2000Vrms, 1min. Output-Ground:
23		Withstand voltage			---	500Vrms, 1min.
24		Insulation resistance			---	More than 100Mohm at 25°C and 70% RH. Output-Ground: 500Vdc
25		Weight (Typ)			Kg	3.7
26		Size (W*H*D)			---	440x44x351mm. Refer to Outline Drawing.
27		Warranty			Yr	Two Years
Notes:
*1:	The Output of all the FPS1000 modules are connected in parallel in the rack.
*2:	For input voltage lower than 100Vac, maximum output power derated by 10% of the power rating.
*3:	For cases where conformance to to various safety standards (UL, EN etc.) is required, to be described
		as 100-240Vac (50/60Hz).
*4:	Remote sensing can compensate up to 1V drop on each load wire.
*5:	Not apllicable for units with I2C bus option.

25