2 SETTING ITEMS (ADMIN)
152 Setting Network Functions
3
Specify the following items as required and press [OK].
SMB PROTOCOL — Select whether the SMB protocol is enabled or disabled. When you select [ENABLE], select
the function that you want to disable in [RESTRICTION].
RESTRICTION — Select whether the printer/file sharing function is disabled. You can select one of the following:
y[NONE]: This option allows you to not restrict the printer/file sharing function. Both SMB printing and the file
sharing service using SMB are enabled.
y[PRINT SHARE]: This option allows you to disable SMB printing.
y[FILE SHARE]: This option allows you to disable the file sharing service using SMB.
[NetBIOS NAME] — Press this button to enter the Windows computer name of this device if this device is
connected to the Windows network. This must be specified when you want to enable SMB printing.
LOGON — This displays the Windows network logon environment. “workgroup” will be displayed if this equipment
is logged on to the workgroup network and “domain” will be displayed if this equipment is logged on to the domain
network. This option can be specified only from TopAccess. For details, refer to the TopAccess Guide “Chapter
8: [Administration] Tab Page”.
[WINS PRIMARY] — Press this button and enter the IP address of the primary WINS server using the digital keys
if required.
[WINS SECONDARY] — Press this button and enter the IP address of the secondary WINS server using the
digital keys if required.
When you press [NetBIOS NAME], the on-screen keyboard is displayed. Enter the value using the on-screen
keyboard and press [OK] to set the entry. You can also use the digital keys on the control panel to enter
numerals.
yWhen you select [DISABLE] for the [SMB PROTOCOL] option or [FILE SHARE] for the [RESTRICTION]
option, the Save as File to MFP Local function will be disabled.
yIf this equipment is configured to log on to the domain in the SMB Session of TopAccess administrator mode
but “workgroup” is displayed, logging on to the domain network has failed. In that case, confirm that the
Windows Server and the SMB Session settings are correct.
yWhen you set “Domain” for the Log-on setting in the SMB Session of TopAccess administrator mode, this
equipment will log on to the domain network after turning ON the power or changing the network settings
and pressing [APPLY NOW].
yYou can enter only alphanumeric characters and “-” (hyphenation) for NetBIOS names.
yDo not enter an IP address that starts with “0” (i.e. “0.10.10.10”), “127” (i.e. “127.10.10.10”), or “224” (i.e.
“224.10.10.10”). If you enter such an address, the equipment cannot communicate with the WINS server.
yIf you enter “0.0.0.0” for [WINS PRIMARY] and [WINS SECONDARY], this equipment will not use the WINS
server.
yWhen [DYNAMIC] or [NO AUTO IP] is selected for the ADDRESS MODE option in the TCP/IP setting, this
equipment can obtain the IP address for [WINS PRIMARY] and [WINS SECONDARY] from the DHCP
server.