Toshiba 4540C manual Specify the following items as required, and press, Options Paper Feeding

2 SETTING ITEMS (ADMIN)

3 Specify the following items as required, and press .

AUTOMATIC CHANGE OF PAPER SOURCE — Selecting [ON] for this function allows the equipment to feed the same size of paper from a different drawer even if the specified drawer from which paper is being fed is empty. This function is always enabled when copy operations are performed using Automatic Paper Selection (APS). To learn more about APS, refer to the Copying Guide “Chapter 3: BASIC COPY MODES”.

When an attribute other than “NONE” is set for a drawer, the Automatic Change of Paper Source function is disabled for the paper in this drawer.

For instructions on how to verify and/or change an attribute for a drawer, see the following page: P.31 “Setting Drawer”

PAPER OF DIFFERENT DIRECTION — Selecting [ON] for this function allows the equipment to feed the same size of paper that is set in a different direction if the drawer from which paper is being fed is empty.

Paper feeding when the drawer is out of paper during copying is as follows:

This is an example when the drawer for feeding paper is automatically changed while data is being copied on A4-size paper.

Options		Paper Feeding
AUTOMATIC CHANGE OF	PAPER OF DIFFERENT	Using Automatic Paper	Specifying the drawer
PAPER SOURCE	DIRECTION	Selection (APS)	manually
ON	ON	A4 and A4-R paper are fed.	A4 and A4-R paper are fed.
ON	OFF	A4 paper is fed.	A4 paper is fed.
OFF	ON	—	—
OFF	OFF	—	—

SUSPEND PRINTING IF STAPLER EMPTY — When the stapler is empty during stapling in other than the saddle stitch mode, you can select whether to stop printing or not.

Selecting [ON] stops the job with stapling, while selecting [OFF] continues the job without stapling.

If the stapler is empty in the saddle stitch mode, printing stops.

DEFAULT MODE OF AUTO COLOR — Press the default color mode for auto color.

[DEFAULT MODE OF AUTO COLOR] is available only for the e-STUDIO6550C Series and e-STUDIO4540C Series.

Setting Copy Functions 167