2 SETTING ITEMS (ADMIN)

2 Press [DEFAULT] to set the default calibration setting, or [CALIBRATION] to adjust the calibration setting.

yWhen you press [DEFAULT], the system maintains the default calibration setting and returns to the previous screen.

yWhen you press [CALIBRATION], a chart is printed out and the calibration guide illustration is displayed on the touch panel.

Proceed to the next step.

3

Place the printed chart face down on the glass, so that the two black rectangular marks

are placed on the left side.

4 Press the [START] button on the control panel.

The calibration begins. Do not operate the equipment until the message “Scanning and calibrating” disappears.

If the chart is not properly placed, the message “Set chart correctly” is displayed on the touch panel. In this case, return to step 3 and realign the chart.

96 Setting General Functions

Page 98
Image 98
Toshiba 4540C manual Are placed on the left side, Press the Start button on the control panel