2 SETTING ITEMS (ADMIN)

Setting Copy Functions

You can change the system behavior for the copy operation, such as the maximum number of copies, auto 2-sided mode, and the sort mode priority.

1 Press [COPY] in the ADMIN menu (1/2).

The COPY screen is displayed.

To display the ADMIN menu, see the following page:

P.75 “Entering Admin Menu”

2 Specify the following items as required and press .

MAXIMUM COPIES — Press the number button that indicates the maximum number of copies to be allowed.

The maximum number of copies to be allowed is as follows:

-For e-STUDIO6550C Series, e-STUDIO856 Series: 9999 copies

-For e-STUDIO4540C Series, e-STUDIO456 Series: 999 copies

AUTO 2-SIDE MODE — Press the button of the 2-Sided mode that initially applies to copy settings when originals are placed in the Automatic Document Feeder.

y[OFF] — When this button is selected, the initial setting of the 2-Sided mode will be [1 -> 1 SIMPLEX] when originals are placed in the Automatic Document Feeder.

y[1->2 DUPLEX] — When this button is selected, the initial setting of the 2-Sided mode will be [1 -> 2 DUPLEX] when originals are placed in the Automatic Document Feeder.

y[2->2 DUPLEX] — When this button is selected, the initial setting of the 2-Sided mode will be [2 -> 2 DUPLEX] when originals are placed in the Automatic Document Feeder.

y[USER] — When this button is selected, the screen to select the 2-Sided mode will be displayed when originals are placed in the Automatic Document Feeder.

SORT MODE PRIORITY — Select the default sort mode that is applied for copy jobs. If [STAPLE] is selected, the output is stapled on the upper left corner as the default. To staple copies, the optional finisher must be installed.

166 Setting Copy Functions

Page 168
Image 168
Toshiba 4540C manual Setting Copy Functions, Press Copy in the Admin menu 1/2