1 SETTING ITEMS (USER)

For e-STUDIO856 Series

You can select either [THICK1], [THICK2], or [THICK3] for the paper type.

yFor details of the paper types, refer to the Copying Guide “Chapter 1: BEFORE USING EQUIPMENT”.

yYou can select each button of the attribute to restrict the uses for a specific job. For example, if you select [INSERT] for a drawer, the paper in the drawer is always used for copy insertion.

yWhen the thickness “THICK 1, 2 or 3” (THICK 1 only for the e-STUDIO456 Series), or an attribute other than “NONE” is set for a drawer, the paper placed in this drawer will not be used for Automatic Paper Selection (APS).

For details of APS, refer to the Copying Guide “Chapter 3: BASIC COPY MODES”.

yWhen an attribute other than “NONE” is set for a drawer, the Automatic Change of Paper Source function is disabled for the paper in this drawer.

For details of this function, see the following page: P.166 “Setting Copy Functions”

34 Setting Drawer

Page 36
Image 36
Toshiba 4540C manual For e-STUDIO856 Series