2 SETTING ITEMS (ADMIN)

„Setting the SMB protocol

When you want to make this equipment visible in the Windows network, you must enable the SMB protocol and enter the NetBIOS name and workgroup to specify the device name of this equipment and workgroup where it will be visible.

If your network uses the WINS server to allow SMB communications across segments, you must specify the WINS server address so that this equipment will be visible from the different segments.

This must be enabled for SMB printing, Save as file to the network folder using SMB, and sharing the “FILE_SHARE” folder (that is the local folder of this equipment) in the network.

1 Press [NETWORK] in the ADMIN menu (1/2).

The NETWORK menu is displayed.

To display the ADMIN menu, see the following page:

P.75 “Entering Admin Menu”

2 Press [SMB].

The SMB screen is displayed.

Setting Network Functions 151

Page 153
Image 153
Toshiba 4540C manual „ Setting the SMB protocol, Press SMB