8-2
User’s Manual
OPTIONAL DEVICES
PC cards
The computer is equipped with a PC card expansion slot that can accommodate one
5 mm Type II card. Any PC card that meets industry standards (manufactured by
TOSHIBA or other vendor) can be installed. The slots support 16-bit PC cards,
including PC card 16’s multifunction card and CardBus PC cards.
CardBus supports the new standard of 32-bit PC cards. The bus provides superior
performance for the greater demands of multimedia data transmission.

Installing a PC card

One PC card connector is located one above the other on the left side of the
computer. Connector is accessed from the same slot. You can install one Type II
card.
Windows’ hot-install feature lets you install PC cards while the computer’s power is
on.
NOTES: 1. Do not install a PC card while the computer is in standby or
hibernation mode. Some cards might not work properly.
2. An HDD or CD-ROM connected to a 16-bit PC card, might
affect the performance of the computer’s sound system and
data transmission, including slower transmission speeds
and dialing errors.
To install a PC card, follow the steps below.
1. Insert the PC card.
2. Press gently to ensure a firm connection.
Figure 8-1 Inserting the PC card
PC CARD