OPTIONAL DEVICES
User’s Manual
2.Please do not remove the SD card/MultiMediaCard/ Memory Stick from the SD card/MultiMediaCard/ Memory Stick slot while in Standby or in Hibernation state. If you do, PC may become unstable or the data in SD card/MultiMediaCard/Memory Stick may be lost.
3.Please do not turn off PC or go into Standby/Hibernation ,while computer is accessing the card; If you do, PC may become unstable or you may lose data.
Memory expansion
You can install additional memory in the computer’s memory module to increase the amount of RAM.
CAUTION: Only memory module with the following parts numbers can be installed:
256MB 512MB 1024MB
Installing memory module
To install a memory module, make sure the computer is in boot mode then:
1.Turn the computer off in boot mode. Refer to the Turning off the power section in Chapter 3.
CAUTIONS: 1. If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them.
2. Do not try to install a memory module with the computer turned on or turned off in Standby and Hibernation mode. You can damage the computer and the memory module.
| 3. If you install a memory module that is not compatible | |
| with the computer, a beep will sound when you turn | |
| on the power. If the module is installed in slot A, there | |
| will be a long beep followed by a short beep. If the | |
| module is in slot B, there will be a long beep followed | |
by two short beeps. In this case shut down the power | ||
and remove the incompatible module. | ||
|
