Toshiba C650D user manual Lan

HW Setup and Passwords

LAN

Wake-up on LAN

This feature lets the computer's power be turned on from shutdown when it receives a wake-up packet ( Magic packet ) from the LAN.

Do not install or remove a memory module while Wake-up on LAN is enabled.

■The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature.

■Regarding Wake-up on LAN from sleep or hibernation, you must check the “Allow the device to wake the computer” check box within the LAN

Device properties. ( This feafure does not effect the Wake-up on LAN from sleep or hibernation. )

Power will be automatically turned on when a signal is received from an administrator's computer which is connected via a network. The following settings can be changed when the Built-in LAN is Enabled. Connect the AC adaptor when using the Wake-up on LAN function. The battery retention time will be shorter than the times listed in this manual when this function is enabled. Refer to the section in chapter 6, Retaining Data with Power off.

Enabled	Enables Wake-up on LAN from shutdown.
Disabled	Disables Wake-up on LAN from shutdown.
	(Default)

Built-in LAN

This feature enables or disables the Built-in LAN.

Enabled	Enables built-in LAN functions. (Default)
Disabled	Disables built-in LAN functions.

User’s Manual 7-5