Hardware, Utilities and Options
1.THE MEMORY CARD*
*THE CARD’S SHAPE DEPENDS ON THE CARD YOU PURCHASED.
Figure 3-3 Removing the inserted memory card
■If you remove the memory media or turn off the power while the computer is accessing the memory media, you may lose data or damage the media.
■Do not remove the memory media while the computer is in Sleep or Hibernation Mode. The computer could become unstable or data in the memory media could be lost.
■Do not remove only the miniSD/microSD Card while leaving the adaptor in the Bridge Media slot.
Memory Expansion
You can install additional memory in the computer’s memory module to increase the amount of RAM.
Installing Memory Module
To install a memory module, make sure the computer is in boot mode then:
1.Turn the computer off in boot mode. Refer to the Turning Off The Power section in Chapter 1.
■If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them.
■Do not try to install a memory module with the computer turned on or turned off in Sleep and Hibernation Mode. You can damage the computer and the memory module.
User’s Manual |
