Operating Basics
■ Do not touch the laser lens. Doing so could cause misalignment.
■Do not keep foreign matter from entering the drive. Check the back edge of the tray to make sure it carries no debris before closing the drive.
4.Press gently at the center of the CD/DVD until you feel it click into place. The CD/DVD should lie below the top of the spindle, flush with the spindle base.
5.Push the center of the drawer to close it. Press gently until it locks into place.
If the CD/DVD is not seated properly when the drawer is closed, the CD/DVD might be damaged. Also, the drawer might not open fully when you press the eject button.
Figure 4-8 Closing the drawer
Removing Discs
To remove the CD/DVD, follow the steps below and refer to below figure.
Do not press the eject button while the computer is accessing the drive. Wait for the optical disc drive indicator to go out before you open the drawer. Also, if the CD/DVD is spinning when you open the drawer, wait for it to stop before you remove it.
Please follow the steps below and refer to figures.
1.To pop the drawer partially open, press the eject button. Gently pull the drawer out until it is fully opened.
User’s Manual |
