Toshiba CT manual Silent Messaging Busy Station, To receive a notification message, 0RGH +

LCD Operation

Messages

7.Press 3DJH.

8.Press 0RGH.

9.Press ￿.

➤To receive a notification message

➤Press 0VJ.

At the destination station, the LCD displays the originating station number and the 0VJ LED flashes.

MSG NO.?

MODE NO.?

SENT 207M

➤To cancel the message from the telephone that set the message

➤Press [PDN] and dial ￿￿￿;;;, where XXX is the [PDN] of the telephone that set the message.

Silent Messaging (Busy Station)

An audible tone and an LCD message can be sent to an LCD station that is busy. The busy station can return a message to the calling station’s LCD. The two stations may continue this procedure to carry on a “silent” conversation. Soft Keys must be OFF ( 0RGH + ￿￿￿) at the sending and receiving stations for this feature to operate.

➤To send a message to a busy station

1.	When you receive a	210=[DN]
			OVER TO ST210
	busy tone, press
			MSG NO?
	0RGH + ￿.
2.	Enter the message	Station message (10~19) and system
	number.	message (60~99). The LCD displays
		the message. (This assumes the
		message is already stored in memory.)
3.	Press 3DJH.	The destination station beeps four
		times and the message displays for 30
		seconds, or until you hang up.

Strata DK Digital Telephone 5/99 95