Toshiba CT manual Message Waiting Light on PDN, To answer a Msg light

Features

Message Waiting

Message Waiting

If you call a busy station [DN] or its user does not answer, you can leave a message waiting indication at the station. The Msg LED at the called station flashes and the user can call you back by pressing the 0VJ button with the flashing LED. (Voice mail devices, as well as people, can leave message waiting indications.)

All telephones have a standard (fixed) 0VJ button/LED for receiving/retrieving messages left by callers that called the station’s [PDN]. Telephones that own [PhDNs] can also have up to four additional (flexible) message waiting [PhDN/MW] buttons/LEDs for receiving/retrieving messages left by callers that called the respective [PhDNs]. To use the [PhDN] message waiting feature, your telephone needs to have [PhDN/MWs].

Up to four message waiting indications and LCD messages can be left at each [DN] or [PhDN] at one time. The fourth message and one of the LEDs is reserved for the Message Center.

Message Waiting Light on [PDN]

➤To answer a Msg light

1.	Press 0VJ, then lift	Your phone rings the station or voice mail device that set the
	the handset.	indication. The LED continues to flash red.
	If you reach a station
	that is busy or does
	not answer, go on-
	hook and press 0VJ
	again. The system
	rotates to the next
	message sender.
	The LCD can show	In the example (shown at right), the
			NO. 204
	up to three stations	display indicates that station DN [203]
			CALL 203-201+
	that have left	received a message signal from DN
	messages for the	[201]. The “+” indicates additional messages.
	[PDN] and three for
	each of your
	[PhDNs].
2.	Press 6FUROO to
	display them.

48 Strata DK Digital Telephone 5/99