Toshiba CT manual Flexible Buttons, Line Buttons, Directory Number DN Buttons

			The Grand Tour
			Buttons
Table 1	Fixed Button Definitions (Continued)
	Button		Definitions
	6SNU	➤	Press to toggle the speaker ON/OFF. The LED indicates the status of the
	(Speaker)		speaker.
		Notes
		♦	6SNU must be pressed and held down when switching from Handset to
			Speakerphone mode.
		♦	Also selects a line or the internal [PDN] if programmed for auto preference
			in system programming. Can be used to disconnect on-hook
			speakerphone calls.
	9RO▲	➤ Press to adjust volume levels (see “Volume Controls” on Page 10).
	9RO▼

Flexible Buttons

All flexible buttons must be programmed for your telephone in system programming and vary for individual telephones. If a button does not appear on your display or telephone keystrip label, see your System Administrator for button assignments.

Line Buttons

You may have buttons designated as /LQH and/or 3RROHG￿/LQH￿*US which enable you to directly access outside Central Office (CO) lines. 3RROHG￿/LQH￿*US enables you to access available CO Lines from a group of lines appearing under one button.

If your telephone does not have a /LQH or 3RROHG￿/LQH￿*US button and you want to access outside CO lines, you can use access codes. For a listing of these codes, see “Access Codes” on Page 109.

Directory Number [DN] Buttons

The [DN] buttons consist of: [PDNs], [SDNs], and [PhDNs]. They are used to initiate or answer a call and are known as your extension or intercom number(s). You can have multiple [DN] buttons on your telephone (see Figure 2), including [DNs] belonging to another telephone, [SDNs].

Incoming calls ring your telephone’s [PDNs] from the top down. For example, incoming calls to Station 10’s [PDNs] first ring the “10-1” button, then “10-2,” and finally “10-3.” Your [PDN] is considered busy only when all of the [PDNs] are being used by your telephone or other telephones, and/or when your telephone is on any type of CO Line or [DN] call.

Strata DK Digital Telephone 5/99 5