Toshiba CT manual Message Waiting Light on PhDN/MW, To cancel the Msg light, To respond to PhDN/MW

		Features
		Message Waiting
	3. After receiving the	If the Msg LED continues to flash, you have more messages—
	message(s), place the	repeat the Steps to retrieve them. Voice mail devices may
	handset on hook.	cancel the indication after a short delay.
➤ To cancel the Msg light
	➤ Press 0VJ and lift the	Your Msg LED turns OFF when the called party answers.
	handset.	Note The called party must answer—by either going off-
	...or [DN] + ￿￿￿￿￿to	hook or by pressing 6SNU—for the indication to be
		cancelled automatically.
	cancel the light. This
		Your Msg LED turns OFF without calling the telephone or VM
	must be done for each
	message recorded.	device.

Message Waiting Light on [PhDN/MW]

➤ To respond to [PhDN/MW]

1. Press the flashing red	Your phone rings the station or voice mail device that left the
[PhDN/MW] LED.	message. If the called party or VM device answers, the
	message waiting indication is cancelled automatically. If there
	is no answer, hang up and try at a later time. The red
	[PhDN/MW] LED on your phone continues to flash.
2. After receiving the	If you have more messages, the red [PhDN/MW] LED
message, press 6SNU	continues to flash. To answer the next message, repeat this
...or place the handset	procedure.
on-hook.

➤To cancel [PhDN/MW]

1.	Press [PhDN].	You hear a steady dial tone.
2.	Enter ￿￿￿￿.	The dial tone stops.
3.	Press 6SNU.	The [PhDN/MW] LED turns OFF, indicating that the message
		has been canceled.

Strata DK Digital Telephone 5/99 49