Toshiba CT manual Call Park Orbits, To park a call

Features

Call Park Orbits

Call Park Orbits

The Call Park feature enables you to hold a call temporarily in an orbit (the area where the call is held). Anyone can retrieve the call from the orbit using the same or a different station. There are 20 General Park Orbits for the system and 1 Personal Park Orbit for each station.

Once you have parked a call in an orbit, you can:

♦Hang up and retrieve the parked call at a later time

♦Originate another call

♦Access a voice paging device to announce the parked call for pickup from another station If you park a call and it is not retrieved the following occurs:

♦If your station is idle when the system Call Park recall timer expires, the parked call automatically recalls to your station.

♦If your station is busy, the parked call camps-on.

If you have an LCD telephone, you can let the system automatically select an available orbit number which displays on your LCD. To monitor the calls parked at your station, see “Call Park Orbit List Display” in Chapter 3 – LCD Operation .

➤To park a call

1.	While on a call, press	The LED flashes green (consultation-
			ENTER ORBIT NO
	3DUN￿LQ￿2UELW	hold).
			RTRN
	...or &QI￿7UQ +
	￿￿￿￿.
2. Enter a General Orbit		The call is parked and the CO line
	Number (￿￿￿~￿￿￿)	flashes (Hold), or the [DN] LED turns
	or a valid [PDN]	OFF.
	...or if you have an	The system parks the call on the lowest vacant Orbit Number.
	LCD, press ￿￿￿.
3.	Hang up.	The caller’s extension or Line number
			6793 PK ORBIT 900
		and the orbit number are shown.
		If the parked call is not retrieved
			LN 2 ORBIT 900
		within a specified time, the call rings
		back to your phone.

Strata DK Digital Telephone 5/99 31