Toshiba CT manual CO Line Access Codes, To access a line

Access Codes A

This appendix contains access codes for outside Speed Dial numbers, CO lines, Paging Group and Paging Zone Codes.

CO Line Access Codes

CO lines are used when you dial an outside number. If your telephone does not have a &2 or /LQH button, you can enter the appropriate code listed in Table 12 to access an outside line.

You can also store the code on a Speed Dial (6') button for one-touch access. If you are

storing a CO line access code onto a Speed Dial code, enter ￿￿ before the CO access code (e.g., to store code ￿￿￿￿, enter ￿￿￿￿￿￿).

In some systems, ￿ is used as a general group code or to access Least Cost Routing (LCR). System users are required to dial ￿ in order to access an outside line. If you press ￿ in a system programmed with LCR, you may not hear internal dial tone, depending on system programming.

See your System Administrator for the code which applies to your telephone.

➤To access a line

➤Press [PDN] + CO Line Access Code

Table 12	CO Line Access Codes
	System	CO Line Access Codes
	DK14	￿￿or￿￿￿￿a￿￿￿￿or￿￿￿￿￿￿a￿￿￿￿￿
	DK16e/DK16	￿￿or￿￿￿￿a￿￿￿￿or ￿￿￿￿￿a￿￿￿￿￿
	DK40i/DK40	￿￿or￿￿￿￿a￿￿￿￿or ￿￿￿￿￿a￿￿￿￿￿

Strata DK Digital Telephone 5/99 109