Toshiba CT Tone/Pulse Dialing, Two Tandem CO Line Connection, DN Button, To change Tone Dialing

Features

Tone/Pulse Dialing

Tone/Pulse Dialing

With some older Central Offices, you may have to make calls on CO lines that are programmed for rotary dial pulses. This feature enables you, while on these lines, to switch to tone dial in order to access remote equipment (such as an answering machine) requiring DTMF tones.

With ISDN calls, when 7RQH￿'LDO￿6HOHFW is pressed, all of the digits entered after that point will be sent with DTMF tones.

➤To change Tone Dialing

1.	Access a CO line.	Although the CO line is programmed for rotary dial pulses,
		access the CO line and dial the telephone number like any other
		call described in this user guide.
2.	Dial a telephone
	number.
3.	While on the call,	The Tone LED lights steady red and you are able to send
	press 7RQH￿'LDO￿	DTMF tones with your dial pad. The feature is cancelled when
	6HOHFW.	the call is completed.

Two (Tandem) CO Line Connection

[DN] Button

This feature enables a station user to connect two CO lines, then drop out of the conversation.

➤To connect two outside lines (using a [DN] button)

1.While talking on an outside call using a

[DN] button, press

&QI￿7UQ.

2.Dial a CO line access code and then the outside telephone number.

You hear dial tone. The [DN] LED flashes (conference rate).

Strata DK Digital Telephone 5/99 69