Toshiba CT manual Call Waiting, To answer a waiting call by placing the current call on-hold

Features

Call Waiting

...or if the station is busy or does not answer, hang up

The Line LED flashes green (on-hold). If you transferred the call from a [DN], the [DN]’s LED turns off. The CO line or [DN] camps on to the called station and the called station receives a warning tone. The camped-on call rings when you hang up.

...or to reconnect to the transferred line before it is answered, press the flashing /LQH or [DN] + ￿￿￿.

The Line LED is a steady red when the called station answers the transferred call.

If the call is not answered after a specified Recall time set in system programming, camp-on is cancelled and the transferred call rings back (when your station or [DN] is idle or sends two tone bursts if your telephone is busy).

The LCD shows the CO line number and the station number [203] where it was originally transferred.

NO. 204

CAMP-ON 4

HOLD LINE 2

LN 2 RECALL 203

Call Waiting

You can answer a call that is transferred to your station, even when your station is busy. When another call is camped onto your station, you hear two camp-on tone beeps and the [DN] or Line LED flashes red (on-hold).

If a call is sent to your station when busy, and your station does not have a [DN] or /LQH button available to receive the call, two camp-on tone beeps are sent to your telephone. You must disconnect or transfer the existing call to answer the waiting call.

➤To answer a waiting call by placing the current call on-hold

➤Press +ROG

The existing call is placed on-hold. The camped-on line rings your station (the Line LED flashes green - incoming call).

36 Strata DK Digital Telephone 5/99