Toshiba CT manual Alert Signaling, Attendant Console Calling, To send an Alert Signal

Features

Alert Signaling

Alert Signaling

Alert Signaling enables you to send an alert sound to a predesignated (partner) station by pressing a single button. This feature is based on the “buzz” key, where, for example, a manager might alert his/her administrative assistant to enter the office.

You can have as many as four $OHUW￿6LJQDO(s) to send or receive an Alert Signal to/from other telephones. An Alert Signal is sent even if the alerted telephone is busy (on/off-hook) or in the DND or Call Forward mode.

➤To send an Alert Signal

➤Press $OHUW￿6LJQDO. An alert tone sounds at the designated station.

Attendant Console Calling

Up to four Attendant Consoles can be installed per system. There can be up to three ways to call the Attendant Console, depending upon system programming.

➤ To call any attendant console

	➤ Press a [DN] + ￿.	The call rings the Attendant Console’s ￿￿ button. Dial￿￿ calls
		rotate between the consoles if more than one console is installed.
➤ To call a specific console

➤Press a [DN] + the console’s [DN].

The call rings the console’s ,Q￿'1 (incoming [DN] button). Your System Administrator can provide the Attendant Console(s)

,Q￿'1s.

➤To call all consoles for an emergency

➤Press a [DN] + the emergency access code ￿￿￿￿.

The call rings the (PJU button on all attendant consoles.

Strata DK Digital Telephone 5/99 19