Toshiba CT Soft Key Display, How to Use Soft Keys, To Use Soft Keys to Make a Conference Calll

LCD Operation

Soft Keys

Soft Key Display

Abbreviated Soft Key feature prompts display on the LCD above the Control buttons (0RGH, 3DJH, and 6FUROO). In the following

example, you would press 0RGH for the TRNS function, 3DJH for CONF and 6FUROO for PGE.

TALK ON LINE 2 TRNS CONF PGE

If the Soft Key feature is activated at your station, incoming call information does not display on your LCD while your station is busy. To display this information, you must either disconnect the existing call or place it on hold.

How to Use Soft Keys

This section provides an example of how to use Soft Keys to make a Conference call by adding a station to an outside call. See “Soft Key Prompts” on Page 82 for a list of features that can be accessed with Soft Keys.

Example: Using Soft Keys to Make a Conference Call

While on an outside call (LINE 3) you initiated, your LCD displays the prompts ABR, CONF, and PGE during the first 30 seconds (if ABR does not appear, then this feature was not assigned in system programming).

Thirty seconds after the first digit of the telephone number is dialed, the display changes to TRNS, CONF, and PGE. If the call is an incoming call, the TRNS prompt appears immediately when you answer the call.

➤To Use Soft Keys to Make a Conference Calll

TALK ON LINE 3 ABR CONF PGE

TALK ON LINE 3 TRNS CONF PGE

1.While on an outside

call, press CONF

(3DJH) to initiate the Conference.

(Optional) You can press RTRN (6FUROO) to terminate the operation and return to the outside call.

The outside call is placed on-hold.

LINE OR STATION?

LINE STA. RTRN

80 Strata DK Digital Telephone 5/99